MDL Clutch Set, Kevlar/Ceramic
Big block Change Over 11.5″ long pattern diaphragm pressure plate Hydraulic Release
- Kevlar on the Pressure plate side /Ceramic Facing on the flywheel side
- 11.5″ long pattern 10-spline 1-1/16″ disk
- Pilot Bushing
- Clutch alignment tool
- 1-year warranty
Notes: There is No T/O bearing included with this item.
When you buy a Performance Proven product you know it’s a tried & true product
It has survived the rigorous challenges of Racing on & off track.
Shop with confidence…look for the Performance Proven logo.
ALL Superior clutch disks are ‘ hand-built in-house ‘ so that we may control quality & tolerances.
they are all checked & double-checked for accuracy to exacting standards before they go in the box for shipping. So, you receive a top-quality ready to bolt on clutch.
A little info on Ceramic & Metallic friction surface application
Ceramic or bronze friction materials are for higher horsepower applications, quicker shifts wanted in road racing, and a hard-hitting bite for launching for drag racing. The other application for these surfaces is when going to a larger diameter clutch and/or heavier pressure plate is not an option.
Ceramics and semi-metallics have a higher ‘coefficient of friction than the other materials MDL offers, so it bites harder and holds more power, given the same clamping force. These surfaces are desired in racing applications for how quickly they engage, as well as for handling extreme heat and abuse. MDL ceramics have iron pieces in them that create more friction as the material gets hotter.
For more street-oriented applications, we would use ceramics when we need higher holding power but can’t fit a larger diameter disk (more surface area = more holding power).
If you can’t go to a pressure plate with a higher clamp load, then Ceramic metallic surfaces are a good way to go. As an example, smaller engines make good power but are limited to sub 10″ disk size.
The 3 attributes that determine the torque rating of a clutch are:
- Surface area (disk size)
- Coefficient of friction (Kevlar, organic, ceramic)
- Clamping force of the pressure plate. To get higher torque handling ratings, we must increase at least one of those 3.