GM - 11" Clutch Set
Features:
The other application for these surfaces is when going to a larger diameter clutch and/or heavier pressure plate is not an option.
Ceramics and semi-metallics have a higher 'coefficient of friction than the other materials MDL offers, so it bites harder and holds more power, given the same clamping force. These surfaces are desired in racing applications for how quickly they engage, as well as for handling extreme heat and abuse. MDL ceramics have iron pieces in them that create more friction as the material gets hotter.
For more street-oriented applications, we would use ceramics when we need higher holding power but can't fit a larger diameter disk (more surface area = more holding power). If you cant go to a pressure plate with a higher clamp load, then Ceramic metallic surfaces are a good way to go. As an example, smaller engines make good power but are limited to sub 10" disk size.
The 3 attributes that determine the torque rating of a clutch are:
https://www.moderndriveline.com/all-about-clutch-tech/
All MDL clutches are hand-assembled In-house to ensure quality & flawless operation before they leave.
They are checked & double-checked for accuracy before they go in the box for shipping.
So you receive a ready-to-install Premium piece right out of the box backed by a 1-year free-from-defect warranty.
Details: Bronze facings for high-performance extreme grip clamping fits 26-Spline.
They are checked & double-checked for accuracy before they go in the box for shipping.
So you receive a ready-to-install Premium piece right out of the box backed by a 1-year free-from-defect warranty.
Details: Bronze facings for high-performance extreme grip clamping fits 26-Spline.
Features:
- Low lever height for increased clearance CSC on Hydraulic applications.
- pilot bushings
- alignment tool.
The other application for these surfaces is when going to a larger diameter clutch and/or heavier pressure plate is not an option.
Ceramics and semi-metallics have a higher 'coefficient of friction than the other materials MDL offers, so it bites harder and holds more power, given the same clamping force. These surfaces are desired in racing applications for how quickly they engage, as well as for handling extreme heat and abuse. MDL ceramics have iron pieces in them that create more friction as the material gets hotter.
For more street-oriented applications, we would use ceramics when we need higher holding power but can't fit a larger diameter disk (more surface area = more holding power). If you cant go to a pressure plate with a higher clamp load, then Ceramic metallic surfaces are a good way to go. As an example, smaller engines make good power but are limited to sub 10" disk size.
The 3 attributes that determine the torque rating of a clutch are:
- Surface area (disk size)
- Coefficient of friction (Kevlar, organic, ceramic)
- Clamping force of the pressure plate. To get higher torque handling ratings, we must increase at least one of those 3.
https://www.moderndriveline.com/all-about-clutch-tech/
Don't see what you're looking for, please call 208-453-9800