Our TREMEC TKO small-block conversions are much like the T5 swap. We start with a cable operated 1995 351w Mustang Cobra R model bellhousing. This same bell housing or scatter shield can be used behind any six-bolt 289/302/351 block. The Modern Driveline clutch cable kit or hydraulic kit allows the stock early Mustang, Cougar and…
Installing a TREMEC T-5 in place of an automatic, behind a small block Ford is relatively straight forward. Using many of the same components and concepts as used in Fox body Mustangs in the ’80s and ’90s simplifies the process. Bell housing Start by using a TREMEC T-5 bell housing assembly from a 1984-93…
A quick look at Fox-body Hydraulics, SN95 Mustang hydraulics & reverse lockout modules.
A Short Article About Fitting Application The contemporary racer/builder can reach for an almost limitless selection of AN fitting variations to accommodate any plumbing situation, and with a fair amount of color and coating choices. Some companies even offer a complete line of raw fittings allowing the user to anodize them to a custom color…
VIDEO: Step by Step Installation of a Tremec TKO Transmission FAQ – shifts well when cold vs. hot. Answer: Adjust clutch. Other FAQ’s regarding Installation
Although clutch and flywheel selection seems like black magic science, it really is straightforward. When the right choices are made
It is challenging for us at Modern Driveline to understand the engineering logic behind the Getrag MT-82 six-speed transmission in the 2005-16 Mustang (V-6) and Mustang GT (V-8). The factory-installed MT-82 employs a semi-remote shifter attached to the transmission tunnel tied to the transmission via a shifter rail that, at best, delivers sloppy shift performance…
Preload Bearing Pre-load is defined as: Internal stress to a bearing through application of negative clearance is known as bearing pre-loading. What is mean when you hear: No Bearing Pre-load Allowed There is no clearance and no negative clearance of an installed bearing surface. This does not include any intended spring pressure from a…
A Still Photo Documentary of a TKO 5-Speed Install in a Classic ’70 Dodge Dart
Our TKO 5-Speed Conversion Kit was featured on ‘All Girls Garage’ A 1971 Oldsmobile Cutlass making it a fun drive again