Modern Driveline's Light Foot series Hydraulic clutch master cylinder kit
(.700" bore x 1.2" stroke)
From the SEMA award-winning team that brought you the SN95 Mustang Hydraulics.
MD-910-0052 fit 1979-93 Mustang/Capri and other Fox platforms.
No longer will you have to worry about clutch cable clearance with long tube headers or heavy-duty clutches that cause the clutch cable to fail or heavy pedal effort.
NOTE: early cars with single-pin clutch pedal cable arms must be retrofitted with dual-pin pedal arm (quadrant)
The master cylinder kit replaces the stock clutch cable and quadrant while using the stock clutch pedal and cable hole.
The under-dash linkage converts the pull to a push using the stock clutch cable hole and clutch pedal.
Our linkage was engineered using CAD modeling to provide the best pedal effort curve for a controlled clutch feel & improved driving experience.
Our Fox clutch hydraulic system is the correct solution for many different conversion problems where a clutch cable is no longer used.
Fits:
Owner Bruce Couture's Fox Mustang was the development mule for this kit.
(.700" bore x 1.2" stroke)
From the SEMA award-winning team that brought you the SN95 Mustang Hydraulics.
MD-910-0052 fit 1979-93 Mustang/Capri and other Fox platforms.
No longer will you have to worry about clutch cable clearance with long tube headers or heavy-duty clutches that cause the clutch cable to fail or heavy pedal effort.
NOTE: early cars with single-pin clutch pedal cable arms must be retrofitted with dual-pin pedal arm (quadrant)
The master cylinder kit replaces the stock clutch cable and quadrant while using the stock clutch pedal and cable hole.
The under-dash linkage converts the pull to a push using the stock clutch cable hole and clutch pedal.
Our linkage was engineered using CAD modeling to provide the best pedal effort curve for a controlled clutch feel & improved driving experience.
Our Fox clutch hydraulic system is the correct solution for many different conversion problems where a clutch cable is no longer used.
ALL MDL Hydraulic master kits come with our unique 'One-man Bleeder Kit to help make installation easy.
Fits:
- 1979-93 Mustang
- 1979-86 Carpi
- 1978-83 Fairmont/Zephyr
- 83-86 Granada
- 83-86 LTD
This kit will not fit when using a Trick Flow intake manifold.For this manifold please use the kit part numbers below which feature aremote reservoirMD-910-0052-P MD-910-0052-C MD-910-0052-B
Owner Bruce Couture's Fox Mustang was the development mule for this kit.
- Pedal linkage to maximize pedal control and effort.
- Uses stock clutch pedal and clutch cable hole for ease of installation
- An integral remote reservoir that fits with a '93 Cobra brake booster.
- Works with internal and external slaves.
Need help to decide what you need? Give us a call at 208-453-9800.
