10.4 Metric Clutch Assy/ 26-Spline/ Kevlar/Ceramic/ Cable or Hydraulic

$525.00

-

Features:

  • Kevlar / Ceramic facings
  • Fits a 26-spline input shaft.
  • comes with 3 alignment dowel pin holes
  • Cable throw-out bearing
  • pilot bearing.
  • alignment tool.
Category: SKU: MD-KC7-426

Description

FORD 10.4 metric pattern Clutch Assembly

Great for 1986-1995 applications.
Kevlar facings on the flywheel side & Ceramic on the pressure-plate side

Uses 8mm pressure plate bolts

 


When you buy a Performance Proven product you know it’s a tried & true product
It has survived the rigorous challenges of Racing on & off track.
Shop with confidence…look for the Performance Proven logo.

 

 

Superior brand Precision clutches are manufactured with absolute care, using the finest components available.
All are hand-assembled in-house, and double riveted to maintain Quality & flawless operation before they ship.
MDL produces our clutches with exacting standards and pride to deliver a ready-to-install premium product
you can be confident in, right out of the box
Backed by a 1-year free-from-defect warranty. 

 

A little info on Ceramic & Metallic friction surface application

The ceramic or bronze friction material is for higher horsepower applications, quicker shifts wanted in road racing, and a hard-hitting bite for launching for drag racing.
The other application for these surfaces is when going to a larger diameter clutch and/or heavier pressure plate is not an option. 

Ceramics and semi-metallics have a higher ‘coefficient of friction than the other materials MDL offers, so they bite harder and hold more power, given the same clamping force.  These surfaces are desired in racing applications for how quickly they engage, as well as for handling extreme heat and abuse.
MDL ceramics have iron pieces in them that create more friction as the material gets hotter.  

For more street-oriented applications, we would use ceramics when we need higher holding power but can’t fit a larger diameter disk (more surface area = more holding power).
If you can’t go to a pressure plate with a higher clamp load, then Ceramic metallic surfaces are a good way to go.  As an example, smaller engines make good power but are limited to sub 10″ disk size.

The 3 attributes that determine the torque rating of a clutch are:

  1. Surface area (disk size)
  2. Coefficient of friction (Kevlar, organic, ceramic)
  3. Clamping force of the pressure plate.  To get higher torque handling ratings, we must increase at least one of those 3. 

 

TECH TALK: All About… Clutch Technology

Additional information

Weight 400 oz
Dimensions 14 × 14 × 5 in