69-70 Mustang/Cougar Clutch Cable Kit

$259.00

Clutch Cable kit 1969-70 Mustang/Cougar

Categories: , SKU: MD-6970M-CC

Description

MDL Clutch Cable kit

A Modern Driveline clutch cable kit is the perfect solution for T5,TKO & TKX cable-operated bellhousing conversions.  

Using the stock clutch pedal, a bolt-on adjustable pedal bracket provides the pulling action without welding.
The firewall plate mounts behind the brake master or factory brake booster.  The firewall is equipped with an easy-to-access adjustment that requires no tools.
The clutch cable is not ‘just some fox body cable’, but one specifically designed for the early Mustang to fit ahead of the exhaust that then follows the oil pan flange.
The cable housing is kept in place with mounting hardware using one of the oil pan bolts. Then connected to the cable fork with a fully adjustable rod end.

NOTE: This kit does not work with any bell housing that does not have a cable mounting provision and is at least 7″ deep.

Fits: 1969-70 Mustang/Cougar

Features:

  • Clears Most Headers
  • Heavy Duty Lined Clutch Cable

Includes:

  • Detailed Instructions
  • Heat shielding
  • mounting brackets
  • a firewall grommet
  • mounting hardware

A Modern Driveline clutch cable kit will convert your old mechanical linkage and provide you with a modern cable clutch.
This kit will fit any T5, TKO, TKX  Tremec transmission when installed in your classic 1969-1970 Mustang.

Any of these late-model transmissions can be swapped into your Mustang as long as a cable-compatible bellhousing or scatter shield is used.
This kit includes a heavy-duty lined clutch cable, providing you with a smoother clutch pedal. In this kit, you will have the ability to finely tune the clutch cable with ease.
The stock clutch pedal is reused with an adjustable bracket. Modern Driveline even designed the system to be compatible with both manual and most power brake boosters.

Using the stock clutch pedal, a bolt-on adjustable pedal bracket provides the pulling action without welding.
The firewall plate mounts behind the brake master or factory brake booster. and is equipped with an easy-to-access adjustment that requires no tools.

 


NOTE:

  • This kit works with Pull style clutch forks only
  • It will not work with a push style clutch fork

This kit works with OE Bendix 8″ booster.   It will not work with (band clamp) style brake booster and certain aftermarket 8″ and larger brake boosters.

 

⇐  Can be used

 

 

 

⇐ Can not be used

 

EASY TO MODERATE DIFFICULTY LEVEL ON THIS INSTALL


This clutch cable is not ‘just some fox body cable’, but one specifically designed for the early Mustang to fit ahead of the exhaust that then follows the oil pan flange.
The cable housing is kept in place with mounting hardware using one of the oil pan bolts.
Our cable is connected to the cable fork with a fully adjustable rod end.

  “This is a Complete kit.
……….Not all Kits are created equal.
…………….There are no extras to buy to install this upgrade”.

Please Note:
This Modern Driveline Cable Clutch Conversion Kit is designed to work on manual brakes and for power brakes that are using the original style booster.
This Modern Driveline Kit may not work with aftermarket boosters as they might interfere with the mounts that come through the firewall.

This clutch cable conversion kit makes installing a late model Mustang 5-speed or 6-speed transmission into your classic 1969-1970 Mustang a whole lot easier!
“Give your Mustang a much smoother alternative to your stock mechanical linkage with this heavy-duty lined cable.”

 

 

Additional information

Weight 80 oz
Dimensions 18 × 12 × 3 in

INSTRUCTIONS

IN-6970M-CC Rev 8

QUICK-TECH

MDL Quick-Tech: Clutch Cable Adjustment

Reviews

There are no reviews yet.

Be the first to review “69-70 Mustang/Cougar Clutch Cable Kit”

Supporting Products We Recommend: