This is the second part of this two part series of the T56 Magnum install Plans for the build include a GM LSA Supercharged 6.2 liter V8 backed by a T-56 Magnum transmission from Modern Driveline.
T56 Magnum Install
In these two installments of the “Lou’s Change” 1969 Camaro build, the V8 Speed and Resto shop crew is installing the Tremec T-56 Magnum 6-speed manual transmission into the ’69 Camaro. Although this car was originally a 4-speed manual, the modern 6-speed requires some different steps to install. The T-56 Magnum is the factory transmission behind the 640 HP Corvette ZR1, so we know it will be up to the task in our Camaro. We used a complete kit from Modern Driveline after speaking with Bruce Couture about the considerations, including the size of the Toyo Proxes R888 tires and rear gear ratio of the Currie 9+ rear axle. The Modern Driveline kit came with the transmission, flywheel, clutch, bellhousing, shifter, electronic connections, fluid, hydraulic master cylinder and release bearing. We had to make some modifications to the Camaro’s floor, and then we built a custom transmission cross member and used a Detroit Speed & Engineering hydraulic clutch master cylinder bracket to mount that part cleanly. For more videos of the complete build visit V8TV.
The complete kit as shipped to V8TV included:
- T56 Magnum
- Offset Shifter
- Quicktime Bellhousing
- Bronze/Kevlar Clutch kit
- Billet Steel Flywheel
- Hydraulic Clutch Master kit for 67-69 Camaro/Firebird
- Internal Hydraulic CSC with stainless line
- Amsoil ATF
- All hardware
- Shift lever and Ball