FORD T56 Magnum 6-Speed Transmission 2.97 first .80/.63 OD/ TUET16884

$3,545.00

WE ARE YOUR

TUET16884

  • Gear Ratios 2.97, 2.10, 1.46, 1, .80, .63
  • 26 spline input, 31 spline output Shafts
  • Cable Release guide tube and pivot stud
  • Torque rated 700+ft/lbs
  • Gear drive speedo and 17 tooth Analog Electric Sensor 

Description

FORD T56 Magnum 6-Speed Transmission 2.97 first .80/.63 OD/ TUET16884
Double Overdrive

Introduced in the spring of 2009, the TREMEC T-56 Magnum 6-speed manual transmission, was the long-awaited and highly anticipated replacement for the original T-56.
Magnum transmissions are the strongest 6-speed manuals ever built. They can withstand up to 700 ft.-lbs. of torque, with gears featuring substantially increased face widths.

Based heavily on the TR-6060, the all-new Magnum took the best of TREMEC’s current OEM design and manufacturing technologies and combined them with the most popular features of their intensely popular TKO 5-speed.
The result is the smoothest shifting, greatest driving, strongest, and most versatile 6-speed aftermarket transmission TREMEC has ever produced.

Features & Benefits:TREMEC Elite logo

  • 85mm center distance.
  • 700 lb-ft effective torque capacity.
  • Substantially increased gear face widths over T56
  • 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. 
  • Fully reversible ‘TKO-style’ OEM-grade die-cast aluminum shifter for smooth, positive shift action.
  • Built-in mid-shift provisions under inspection cover for simple, pain-free mid-shift conversions.
  • Triple cone synchronizers on gears 1-4, double cone synchronizers on gears 5-6, as well as reverse.
  • Accurate, smooth, high-rpm shift capabilities.
  • 26 Spline input shaft
  • 31 Spline output shaft
  • Cable release hardened steel guide tube
  • Dual ‘speedo’ pick-ups to accommodate both electric and mechanical type speedometers.
  • Reverse light Switch
  • Required oil = ATF Dextron III

Experience the MDL difference:

When you purchase a complete MDL Conversion Package you get

    • We extend the manufacturer’s warranty by an extra year… with a 1-year grace period.
    • We have the best in the industry customer service.
    •  life-time technical support.

Click here for a Quote

TREMEC
Part Number
Application Torque Cap.
(lbs-ft)
Gear Ratio Chart
1st 2nd 3rd 4th 5th 6th Rev
TUET11430 FORD 700 2.66 1.78  1.30 1.00 0.74 0.50 2.90
TUET11011 FORD 700 2.97 2.10 1.46 1.00 0.74 0.50 2.90
TUET16884 FORD 700 2.97 2.10 1.46 1.00 0.80 0.63 2.90
TUET11940 FORD 700 2.97 1.78 1.30 1.00 0.80 0.63 2.90

 

Get your new T56 Magnum on the road with our Performance T56 Magnum Installation kit featuring bell-housing, flywheel, clutch, the clutch release, we have mechanical or hydraulic actuation, bearings, pressure plate, with all the supporting hardware and more.
Please see our Solutions section for whatever you hit the road with.

If you have questions, please call  208-453-9800

Related Articles & Videos

VIDEO: Toughness Meet Drive-ability / BIG MUSCLE

 

 

TECH GUIDE: 5 Things to Consider When Converting to a TREMEC

Additional information

Weight 3760 oz
Dimensions 46.5 × 22 × 20 in

SPECS

Hover over images to enlarge

 

   

   

  1. Forward shift provision.
  2. Standard reversible rear shifter
  3. Reverse inhibitor solenoid
  4. Fluid drain & fill ports
  5. Mechanical Speedometer output
  6. Common T56 style bolt pattern
  7. Mounting pad for OEM style hydraulic slave or aftermarket guide tube
  8. Clutch fork exit window
  9. Electronic speedometer output
  10. Reverse light switch
  11. Slip yoke output
  12. Trans mount location
APPLICATION INSTALLATION DIMENSION IN INCHES BELLHOUSING
A B C D E F G H
FORD MODULAR 18.70 / 22.8 / 26.4 5.64 26.3 33.6 3.1 12.25 TNCM1078

 

The front of the case is about 1.5″ wider than the trans case.

 

BREAK-IN/DRIVING

Driving Techniques
A 500-mile break-in period will prevent premature wear and possible damage to the transmission. During the
break-in period, you must avoid high RPM shifts and “drag” starts. The clutch must be fully disengaged to shift
the transmission. Do not use excessive force when shifting the transmission. If you experience clash shifts
(grinding), check clutch travel to ensure proper air gap is achieved. Another possible cause of clash shifting is
improper transmission installation (excessive driveline angle / resulting in poor driveline alignment). Do not hold
the transmission in gear by applying force on the shifter. This will damage the pads on the shift forks and may
result in significant damage to the transmission.

WHY BUY A TREMEC

WHY BUY A TREMEC ?

 

Supporting Products We Recommend: