GM Tilton 6000 Hydraulic TKO/TKX – T/O bearing


Hydraulic T/O bearing, Tilton 6000 Series
Bolt-on, GM TKX, flat face bearing
(Adjustment range 2.54-3.25)



Categories: , , , , SKU: MD-900-2507-A


GM Tilton Hydraulic TKO/TKX -T/O bearing Bolt-on
Flat-faced offered by ModernDriveLine is your solution.

  “This is a Complete kit.
……….Not all Kits are created equal.
…………….With MDL there are no extras to buy to install this upgrade”.


The Modern Driveline Hydraulic T/O bearing, Tilton 6000 Series Bolt-on, GM TKO /TKX, flat face bearing

kit includes:

  • Hydraulic Release Bearing
  • Stainless Steel adjustment Sleeve
  • Steel braided supply (AN4) and bleed lines
  • Anti-rotation bolt and high strength transmission retainer bolt
  • Union fitting (connect to main supply line) In most cases 24″ line is recommended. See below


  • Billet aluminum body and piston precision machined in-house at Tilton
  • Stainless steel threaded sleeve offers nearly 1.25″ of adjust-ability
  • High-temperature mono-seal design features a quad tension-er to ensure proper seal tension and the highest reliability
  • Constant contact design self adjusts for clutch wear and maintains the same pedal feel throughout the clutch’s life
  • Newly designed swivel fittings have been thoroughly tested to ensure against leakage
  • High-quality flat face bearing with 1.71″ – 3.03″ contact diameter fits most 8.5″ – 11″ bent-finger and lever-type clutches

1.500” to 1.750” clearance required.

All MDL Kits include a shim set for installation.

Video Link:




These kits come with 5/16″ bearing retainer bolts, if you have 3/8″ bolts as in the case of OEM Muncie transmissions, please call to discuss

Using hydraulic technology from Tilton Engineering (Tilton 6000 Series), these new bearings are easy to install (slip over the bearing retainer of the transmission), and are built to last.  The LF Series Internal Hydraulic Release Bearing is designed as a solution where the external slave causes interference or where no external kit has been developed.  The light pedal feel of the LF Series is maintained with the added benefit of no clearance issues.

Compatibility extends to most bell housings.  While the external slave only works with specific bells, the internal style allows the use of other bells (ie: original 4-speed bells, big block bells, etc).  In fact, one of the markets for this slave is the Ford 4-speed Toploader.

The adjustable sleeve allows nearly 1.25″ of adjustment to accommodate a wide variety of clutches.  The bearing height is adjustable from 1.77″ to 3.00″.  Piston travel is a full 0.7″

A typical complete solution consists of the LF Series Master Clutch Kit, a steel braided line of appropriate length, and the LF Series Internal Hydraulic Release Bearing.


Kits are available for:

  • LS and Viper T56’s
  • GM T5’s, GM TKX’s

View all Kits

Additional information

Weight 48 oz
Dimensions 7 × 6 × 4 in


Tilton Hydraulics Except MD-900-2506 Rev 3



There are no reviews yet.

Be the first to review “GM Tilton 6000 Hydraulic TKO/TKX – T/O bearing”

Supporting Products We Recommend: