70-71 Camaro/Firebird Hyd Clutch Master Kit

$250.00

 
LF Series Hydraulic
Engineered Solution

70-71 Camaro/Firebird F-body Hydraulic Clutch Master Kit – Type 3

Categories: , , , SKU: MD-910-0103

Description

1970-71 Camaro/Firebird Hydraulic Clutch Master Kit

Featured on Car Fix TV Series 

Featured on Car Fix Firebird TKO Conversion

Modern Driveline Light foot series Hydraulic Master cylinder clutch cylinder kit uses the stock clutch pedal.  Engineered to use the factory full swing of the pedal, for maximum leverage, it provides a light pedal effort and full control of the clutch, this translates to a drive you will love.  Using the stock clutch rod hole so there is very little change the car. The master cylinder is mounted on a firewall plate that mounts under the brake master cylinder or booster where the firewall is the strongest so that there is no firewall flex.  Gone of the days of having to engineer a kit from scratch only to leave you frustrated with the results.

The clutch master cylinder utilizes a small bore long stroke cylinder to provide the most common fluid volume requirements needed in today hydraulic slave cylinders.  Kit included the OE quality remote reservoir that has no clamps that can leak.  

All MDL Hydraulic kits come with our 1-man Bleeder kit to make installation easier.

Applications:

  • 70-71 Camaro, Firebird

LF (Light Foot) Series 

  • Aluminum master cylinder body.
  • Uses stock clutch pedal, reduces load on the pivot shaft. 
  • Master is located directly front of clutch pedal.
  • Remote OE quality reservoir
  • Firewall support plate mounts behind the brake master cylinder  
  • Works with most internal and external slaves.

Coupe this kit with Tilton Engineering internal hydraulic release bearings, results in a complete hydraulic clutch solution ready to install.

  Don’t see what you’re looking for, please call  208-453-9800

Made in the USA

If you need a transmission upgrade to get better performance and better fuel economy. 
MDL has all of the
GM Transmission parts you need, including shifters, flywheels, clutch cables, clutch kits, and more, for your new manual transmission.

Additional information

Weight 32 oz
Dimensions 9 × 5 × 3 in

Instructions

IN-910-0103 Rev 3

 

 

Bleeder Kit rev 4

 

Specs

Dimensions:

Type 3 = .750″ bore x 1.4″ stroke (.618cu/in)  

Output fitting size = AN4

The brake booster below due to its profile & mounted distance from the firewall will allow the Hydraulic Master to be mounted correctly.

Reviews

There are no reviews yet.

Be the first to review “70-71 Camaro/Firebird Hyd Clutch Master Kit”

Supporting Products We Recommend: